IMPERAL P-91
POLYURETHANE ELASTIC WATERPROOFING MATERIAL
Imperal P-91 is a mono-component polyurethane waterproofing material, which reacts with air moisture forming a lasting and highly elastic coating with an aluminium colour.
TECMA IMPERAL P-91 provides heat and light reflecting properties thanks to the laminar effect of aluminium particles.
The product is designed for restoring asphalt and bituminous sheets as well as for other acrylic waterborne waterproofing materials.
LOOKING FOR A WATERPROOFING SOLUTION FOR YOUR PROPERTY?
BENEFITS
PROPERTIES
- Highly elastic revolutionary waterproofing material.
- Can be applied straight on other asphalt or bituminous waterproofing systems.
- Can be applied on polyurethane foam without any previous treatment.
- Can be applied on waterproofing materials.
- Highly weather resistant
- Can be applied at low temperatures, curing also at 0ºC.
- Can be applied on other coatings as heat and light reflecting coat.
HOW TO USE
TECMA IMPERAL P-91 can be applied by brush, roller or airless spray gun.
Application should be uniform, thoroughly covering the whole surface.
In wall and floor joints, the product should go up the wall about 25 cm.
Recommended Thickness:
- A 2 s reflecting coat : 0,3 kg./m .
- A 2 s waterproofing coating : 1 – 1,5 kg./m .
- For cleaning tools, it’s recommended the use of our solvent TECMA SOL C.
Special Recommendations:
TECMA IMPERAL P-91 can be applied when temperature is low, even at 0 ºC, and relative humidity is between 30 and 98%, always ensuring there is no condensation on the surface.
- Do not apply on wet or damp surfaces.
- Do not cover with mortar, cement or concrete. The waterproofing material should be always uncovered.
- Do not apply on surfaces which are going to be paved.
Presentation and Storage:
Keep the containers tightly closed and protected from temperatures above 50º C. This product comes in both 10 and 25 kg metal drums.